［1］MARZOUK M, JAINN M, SHANKAR S. Effect of Srmodification on the bendability of cast aluminum alloy A356 using digital image correlation method［J］. Materials Science & Engineering :A, 2014,598（2）: 277-287.
［2］ WANG T M, ZHENG Y P, CHEN Z N,et al. Effects of Sr on the microstructure and mechanical properties of in situ TiB2 reinforced A356 composite［J］. Materials and Design, 2014, 64: 185-193.
［3］MALLAPUR D G, AURADI V, KORI S A, et al. Studies on wear properties of forged A356 alloy with addition of grain refiner and/or modifier［J］. Procedia Materials Science, 2014, 5: 130-136.
［4］MALLAPUR D G, KORI S A, RAJENDRA UDUPA K .Influence of Ti, B and Sr on the microstructure and mechanical properties of A356 alloy［J］. Journal of Materials Science 2011, 46(6): 1622-1627.
［5］CUI X L, WU Y Y, GAO T, et al. Preparation of a novel Al3B5Sr master alloy and its modification and refinement performance on A356 alloy［J］. Journal of Alloys and Compounds, 2014, 615: 906-911.
［6］ SUN S C, YUAN B, LIU M P. Effects of moulding sands and wall thickness on microstructure and mechanical properties of Srmodified A356 aluminum casting alloy［J］. Transactions of Nonferrous Metals Society of China, 2012, 22: 1884-1890.
［7］LIAO C W, CHEN J C, LI Y, et al. Morphologies of Al4Sr intermetallic phase and its modification property upon A356 alloys［J］. J Mate Sci Technol, 2012, 28(6): 524530.
［8］ 孙守庄，彭晓东，谢卫东，等．T6处理对AlSr中间合金变质的A356铝合金组织与性能的影响［J］．热加工工艺，2010，39 (18)：155-157．
［9］ 朱姝晴，龙思远，王慧芳，等．Sr、Fe、Cu对压铸A356合金性能的影响［J］．特种铸造及有色合金，2014，34 (11)：1169-1172．
［10］ 黄芳亮，彭继华,唐小龙，等．Sr、RE对A356合金组织结构和力学性能的影响［J］．特种铸造及有色合金，2010，30 (5)：459-462．
［11］ 仲志国，王爱华，孙海斌,等．B、RE、La对锶变质A356铝合金微观组织及力学性能影响［J］．金属铸锻焊技术，2010，39 (1)：6-9．
［12］ 周承恩，史志铭，韩英，等．富铈混合稀土及锶对铸铝A356组织和力学性能的影响［J］．内蒙古工业大学学报，2014，33 (1)：10-13．
［13］ DONG Y, ZHENG R G, LIN X P, et al. Investigation on the modification behavior of A356 alloy inoculated with a SrY composite modifier［J］. Journal of Rare Earths, 2013,31(2): 204-208.
［14］ MAO F, YAN G Y，XUAN Z X, et al. Effect of Eu addition on the microstructures and mechanical properties of A356 aluminum alloys［J］. Journal of Alloys and Compounds, 2015, 650: 896-906.
［15］LI J H, ALBU M, HOFER F, et al. Solute adsorption and entrapment during eutectic Si growth in ASibased alloys［J］. Acta Materialia, 2015, 83: 187-202.
［16］BARRIRERO J, LI J H, ENGSTLER M, et al. Cluster formation at the Si/liquid interface in Sr and Na modified AlSi alloys［J］. Scripta Materialia, 2016, 117: 16-19.
［17］ CAMPBELL J, TIRYAKIOGLU M. Review of effect of P and Sr on modification and porosity development in AlSi alloys［J］. Materials Science and Technology, 2010, 26(3): 262-268.
［18］ McDONALD S D, DAHLE A K, TAYLOR J A, et al .Modificationrelated porosity formation in hypoeutectic aluminumsilicon alloys［J］. Metallurgical and Materials Transaction B, 2004, 35(6): 1097-1106.