[1]MARZOUK M, JAINN M, SHANKAR S. Effect of Srmodification on the bendability of cast aluminum alloy A356 using digital image correlation method[J]. Materials Science & Engineering :A, 2014,598(2): 277-287.
[2] WANG T M, ZHENG Y P, CHEN Z N,et al. Effects of Sr on the microstructure and mechanical properties of in situ TiB2 reinforced A356 composite[J]. Materials and Design, 2014, 64: 185-193.
[3]MALLAPUR D G, AURADI V, KORI S A, et al. Studies on wear properties of forged A356 alloy with addition of grain refiner and/or modifier[J]. Procedia Materials Science, 2014, 5: 130-136.
[4]MALLAPUR D G, KORI S A, RAJENDRA UDUPA K .Influence of Ti, B and Sr on the microstructure and mechanical properties of A356 alloy[J]. Journal of Materials Science 2011, 46(6): 1622-1627.
[5]CUI X L, WU Y Y, GAO T, et al. Preparation of a novel Al3B5Sr master alloy and its modification and refinement performance on A356 alloy[J]. Journal of Alloys and Compounds, 2014, 615: 906-911.
[6] SUN S C, YUAN B, LIU M P. Effects of moulding sands and wall thickness on microstructure and mechanical properties of Srmodified A356 aluminum casting alloy[J]. Transactions of Nonferrous Metals Society of China, 2012, 22: 1884-1890.
[7]LIAO C W, CHEN J C, LI Y, et al. Morphologies of Al4Sr intermetallic phase and its modification property upon A356 alloys[J]. J Mate Sci Technol, 2012, 28(6): 524530.
[8] 孙守庄,彭晓东,谢卫东,等.T6处理对AlSr中间合金变质的A356铝合金组织与性能的影响[J].热加工工艺,2010,39 (18):155-157.
[9] 朱姝晴,龙思远,王慧芳,等.Sr、Fe、Cu对压铸A356合金性能的影响[J].特种铸造及有色合金,2014,34 (11):1169-1172.
[10] 黄芳亮,彭继华,唐小龙,等.Sr、RE对A356合金组织结构和力学性能的影响[J].特种铸造及有色合金,2010,30 (5):459-462.
[11] 仲志国,王爱华,孙海斌,等.B、RE、La对锶变质A356铝合金微观组织及力学性能影响[J].金属铸锻焊技术,2010,39 (1):6-9.
[12] 周承恩,史志铭,韩英,等.富铈混合稀土及锶对铸铝A356组织和力学性能的影响[J].内蒙古工业大学学报,2014,33 (1):10-13.
[13] DONG Y, ZHENG R G, LIN X P, et al. Investigation on the modification behavior of A356 alloy inoculated with a SrY composite modifier[J]. Journal of Rare Earths, 2013,31(2): 204-208.
[14] MAO F, YAN G Y,XUAN Z X, et al. Effect of Eu addition on the microstructures and mechanical properties of A356 aluminum alloys[J]. Journal of Alloys and Compounds, 2015, 650: 896-906.
[15]LI J H, ALBU M, HOFER F, et al. Solute adsorption and entrapment during eutectic Si growth in ASibased alloys[J]. Acta Materialia, 2015, 83: 187-202.
[16]BARRIRERO J, LI J H, ENGSTLER M, et al. Cluster formation at the Si/liquid interface in Sr and Na modified AlSi alloys[J]. Scripta Materialia, 2016, 117: 16-19.
[17] CAMPBELL J, TIRYAKIOGLU M. Review of effect of P and Sr on modification and porosity development in AlSi alloys[J]. Materials Science and Technology, 2010, 26(3): 262-268.
[18] McDONALD S D, DAHLE A K, TAYLOR J A, et al .Modificationrelated porosity formation in hypoeutectic aluminumsilicon alloys[J]. Metallurgical and Materials Transaction B, 2004, 35(6): 1097-1106. |