[1] |
石绪忠.舰船螺旋桨用涂层技术研究进展[J].腐蚀科学与防护技术,2017,29(2):199203.
|
[2] |
LACKENBY H. Resistance of ships, with special reference to skin friction and hull surface condition [J]. Proc Inst Mech Eng,1962, 176(1962): 9811014.
|
[3] |
赵学志.螺旋桨气蚀修复新工艺[J].中国修船,1994(01):2425.
|
[4] |
DOSTA S, COUTO M, GUILEMANY J M. Cold spray deposition of a WC25Co cermet onto Al7075T6 and carbon steel substrates[J]. Acta Materialia, 2013,61 (2) 643652.
|
[5] |
CONCUSTELL A, HENAO J, DOSTA S,et al. Guilemany, On the formation of metallic glass coatings by means of Cold Gas Spray technology[J]. Journal of Alloys and Compounds, 2015,651 : 764772.
|
[6] |
CHAVAN N M, KIRAN B, JYOTHIRMAYI A, et al., The corrosion behavior of cold sprayed zinc coatings on mildsteel substrate[J]. J Therm Spray Technol, 2013 ,22 (4) :463470.
|
[7] |
LA J H,LEE S Y,HONG S J. Synthesis of ZnMg coatings using unbalanced magnetron sputtering and theirs corrosion resistance[J]. Surface & Coatings Technology, 2014,259: 56-61.
|
[8] |
BAI Y, WANG Z H,LI X B, et al. Corrosion behavior of low pressure cold sprayed ZnNi composite coatings [J].Journal of Alloys and Compounds, 2017 ,719: 194202.
|
[9] |
DIAB M,PANG X,JAHED H. The effect of pure aluminum cold spray coating on corrosion and corrosion fatigue of magnesium (3% Al1% Zn) extrusion[J]. Surface & Coatings Technology, 2017,309:423435.
|
[10] |
MILICHENKO S L, BYKOVSKII O G. Cavitation erosion of propeller materials[J]. Met Sci Heat Treat,1968, 10(7): 558560.
|
[11] |
FRANC J P, MICHEL J M. Fundamentals of Cavitation [M]. Netherlands: Springer, 2006.
|
[12] |
金承泽,张松,陈松培.船舶螺旋桨防腐防污涂装工艺的探讨[J].造船技术,2013(4):3943.
|
[13] |
李科,翟晓凡,管方,等.船用螺旋桨防护技术及其材料研究进展[J].中国腐蚀与防护学报,2017,37(6):495503.
|
[14] |
赵志英.金属的电化学腐蚀与防护[J].内蒙古石油化工,2015,41(5):5960.
|
[15] |
陈正涵,孙晓峰,史玉鹏,等.冷喷涂技术在铜质螺旋桨维修中的应用研究[J].表面工程与再制造,2016,16(3):2024.
|
[16] |
FITRIDGE I, DEMPSTER T, GUENTHER J, et al. The impact and control of biofouling in marine aquaculture: a review[J].Biofouling, 2012, 28(7): 649669.
|
[17] |
MARECHAL J P, HELLIO C. Challenges for the development of new nontoxic antifouling solutions[J]. International Journal of Molecular Sciences, 2009, 10(11): 46234637.
|
[18] |
石崇,张陆.船舶螺旋桨电解防污装置方案技术浅析[J].中国水运,2014,14(2):126127.
|
[19] |
LINDHOLDT A, DAMJOHANSEN K, OLSEN S M, et al.Effects of biofouling development on drag forces of hull coatings for oceangoing ships: a review[J]. J Coat Technol Res,2015,12(3):415444.
|
[20] |
CALLOW J A, CALLOW M E.Trends in the development of environmentally friendly foulingresistant marine coatings[J]. Nature Communications, 2011, 2: 244.
|
[21] |
LEJARS M, MARGAILLAN A, BRESSY C.Fouling release coatings: a nontoxic alternative to biocidal antifouling coatings[J]. Chemical Reviews, 2012, 112(8): 43474390.
|
[22] |
付琴. 激光熔覆高耐蚀耐磨纳米晶涂层的制备与性能研究[D].武汉:华中科技大学,2015.
|
[23] |
冯万亮,桂赤斌,周建奇.生物污损对舰船的危害及防污新技术[J].四川兵工学报,2009,30(11):129132.
|
[24] |
SONALSALE P. An Approach to optimize Mig Welding Parameters by Using Desing of Experiments[J]. IOSR Journal of Mechanical and Civil Engineering,2014:11(6): 7284.
|
[25] |
CORONADO J J, CAICEDO H F, GO′MEZ A L. The effects of Welding processes on abrasive wear resistance for hardfacing deposits[J]. Tribology International 2009; 42(5): 745749.
|
[26] |
BUCHANAN V E, SHIPWAY P H, McCARTNEY D G. Microstructure and abrasive wear Behaviour of shielded metal arc welding hardfacings used in the sugarcane industry[J].Wear, 2007; 263(1/2/3/4/5/6): 99110.
|
[27] |
周权.等离子喷粉堆焊工艺研究[D].镇江:江苏科技大学,2010.
|
[28] |
戚文军,何艳兵,刘斌,等.激光堆焊镍基碳化钨梯度焊层及耐磨机理分析[J].焊接学报,2002,23(1):5760.
|
[29] |
苏新勇,刘基凯,杨秀红. 一种用于船舶螺旋桨腐蚀修复与长效防护的方法:中国, 103801893A [P]. 20140521.
|
[30] |
陈爱国.铜合金螺旋桨裂纹补焊修复工艺[J].焊接,2006(8):4951.
|
[31] |
兰现卿,韦玮,谭宏武,等.船舶铜质螺旋桨的修复技术[J].黄河水利职业技术学院学报,2011,23(1):2425.
|
[32] |
工农兵船厂.环氧粘结剂修补铸铁螺旋桨叶[J].造船技术,1975(2):63.
|
[33] |
徐滨士,谭俊,陈建敏.表面工程领域科学技术发展[J].中国表面工程,2011,24(2):112.
|
[34] |
张博. 氩弧重熔对火焰喷涂铁基复合涂层组织和性能的影响[D].阜新:辽宁工程技术大学,2013.
|
[35] |
邓世均.迎接热喷涂工业的兴起[J].材料保护,2000,33(1):7882.
|
[36] |
田云生,晁兵,白书亚,等.阳极金属热喷涂涂层耐久性研究进展[J].施工技术,2010,39(S1):459463.
|
[37] |
顾晓波,陈国权,杨大明. 用热喷涂层防止锰铜合金螺旋桨腐蚀的研究[J]. 船舶工程, 1997 (6): 3334.
|
[38] |
袁子良.电弧喷涂工艺及喷涂涂层性能的研究[D]. 武汉:武汉大学,2004.
|
[39] |
孙建波,王勇,路民旭, 等.电弧喷涂铝涂层在海洋环境中的腐蚀机理[J].北京科技大学学报,2006,28(11):10291033.
|
[40] |
郝建军.铸铁零件喷砂电弧喷涂修复工艺研究[D].保定:河北农业大学,2001.
|
[41] |
SCHORR B S,STEIN K J,MARDER A R.Characterization of thermal spray coatings [J].Materials Characterization,1999,42(2/3):93100.
|
[42] |
朱海彬,陈景峰,郭学平.海洋平台飞溅区的腐蚀与防护新技术[J].全面腐蚀控制,2013,27(11):5659.
|
[43] |
ALKIMOV A P,KOSAREV V F,PAPYRIN A N.A method of “cold” gas dynamic deposition [J].Soviet Phys Doklady,1990,35:10471049.
|
[44] |
肖正涛. 冷喷涂铜合金涂层制备工艺及其防护性能研究[D].青岛:中国海洋大学,2011.
|
[45] |
饶琼,周香林,张济山,等.超音速喷涂技术及其应用[J].热加工工艺,2004(10):4952.
|
[46] |
陈正涵,孙晓峰,李占明,等.激光重熔与冷喷涂复合工艺制备的镍铝青铜基涂层耐腐蚀性能研究[J].表面工程与再制造,2017 (5):2327.
|
[47] |
SILVA F S D, BEDOVA J, DOSTA S, et al. Corrosion characteristics of cold gas spray coatings of reinforced aluminum deposited onto carbon steel[J]. Corrosion Science, 2017, 114: 5771.
|
[48] |
谷春艳, 霍树斌, 王吉孝,等. 冷喷涂Al涂层性能及沉积行为的分析 [J]. 焊接, 2006(12): 4245.
|
[49] |
肖正涛,李相波,王佳, 等.冷喷涂铬锆铜涂层在海水中的耐蚀性能[J].中国腐蚀与防护学报,2012,32(01):1822.
|
[50] |
石仲川,张晓云,汤智慧, 等.300M钢表面冷喷涂锌镍复合涂层性能研究[J].表面技术,2016,45(6):100106.
|