基于MAGMASOFT的大型铝合金叶轮铸造工艺模拟

doi:10.3976/j.issn.1002-4026.2018.04.008

Abstract

Abstract:

A sand casting process scheme for large aluminum alloy impeller casting was designed in this paper. By using the casting simulation software MAGMASOFT, the filling process, the distribution of the gas defects and the temperature field distribution of the casting were simulated. According to the analysis, the main reason for the defects of the castings was the unreasonable design of the riser at the mouth ring. It is proposed to add insulation sleeve to the riser at the mouth ring to increase the feeding effect of the riser. The simulation results show that the problems of shrinkage porosity and shrinkage tendency of castings are effectively solved after optimizing the process.

Key words: MAGMASOFT, numerical simulation, process optimization, impeller

CLC Number:

TG249.2

SUN De-zhi，WANG Gui-qing，TIAN Chang-wen. Simulation of casting process for large aluminum alloy impeller based on MAGMASOFT[J].SHANDONG SCIENCE, 2018, 31(4): 44-49.

References

［1］宗学文,徐文博.铝合金航空压气叶轮低压铸造工艺数值模拟及优化[J].热加工工艺，2017，46(15):102105.
［2］王荣滨.铸造铝合金缺陷分析与热处理工艺研究[J].铸造技术，2008，37(5):1013.
［3］骞西昌,王英杰.铝合金反重力铸造充型过程数值模拟[J].航空材料学报，2003，23(增刊):5557.
［4］杨欢庆,孙飞,王琳,等.铝合金叶轮铸造工艺优化设计[J].特种铸造及有色合金，2014,34（6）：570573
［5］KWON H J,KWON H K.Computer aided engineering (CAE) simulation for the design optimization of gate system on high pressure die casting (HPDC) process[EB/OL]. [20180323].https://doi.org/10.1016/j.rcim.2018.01.003.
［6］HAZRA M, BALAN K P. Failure of a nickel aluminium bronze (NAB) canned motor pump impeller working under polluted sea water–Influence of material selection, section thickness dependent microstructure and temper annealing heat treatment[J]. Engineering Failure Analysis, 2016, 70:141156.
［7］胡聘聘,盖其东,李相辉, 等.铸型搅动细晶铸造对K492M合金向心叶轮组织与拉伸性能的影响[J].铸造,2016,65(11):10451050.
［8］姜耀林,邵中魁,郭嘉.基于3D打印技术的离心泵叶轮快速精铸工艺研究[J].制造业自动化,2015,37(1):153156.
［9］赵健,衣春雷.复杂不锈钢叶轮熔模铸造工艺的优化[J].材料研究学报,2015,29(12):955960.
［10］何波,周泓江,李建辉,等.镍基高温合金叶轮熔模铸造过程的数值模拟[J].稀有金属,2016,40(3):227235.
［11］CLEARY P, HA J, ALGUINE V, et al. Flow modelling in casting processes[J]. Applied Mathematical Modelling, 2002, 26(2):171190.
［12］袁红利,张平发.ZL201合金叶轮的铸造[J].铸造技术,2003,24(3):182183.

Metrics

Comments

Recommended 0

Open Access This article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits third parties to freely share (i.e., copy and redistribute the material in any medium or format) and adapt (i.e., remix, transform, or build upon the material) the articles published in this journal, provided that appropriate credit is given, a link to the license is provided, and any changes made are indicated. The material may not be used for commercial purposes. For details of the CC BY-NC 4.0 license, please visit: https://creativecommons.org/licenses/by-nc/4.0

[1]	ZHAO Chongxin, CUI Jianbo, JIN Yanchao, HAN Yazhou, WU Gongpeng, HE Yan, WEI Zhenwen. Numerical study on heat transfer characteristics of supercritical CO₂ in vertical tubes at far-critical points [J]. Shandong Science, 2025, 38(1): 83-95.
[2]	ZHANG Ruihan, JIANG Lewen, WANG Yue, HAO Zongrui. Optimization of structural parameters and oil removal effect of a self-induced vortex oil collector [J]. Shandong Science, 2024, 37(6): 12-21.
[3]	FENG Hao, WANG Jie, SUI Chunjie, CHEN Wei, ZHANG Bin. Numerical simulation study of sistributed disc-type submerged combustion evaporator [J]. Shandong Science, 2024, 37(4): 75-83.
[4]	ZHANG Guojian, MENG Hao, XIONG Wei, BAI Tao, MENG Xianchen, WANG Jun, LÜ Xiao. Predicting surface movement and deformation for continuous mining and continuous backfilling under an artificial lake [J]. Shandong Science, 2023, 36(5): 33-43.
[5]	LI Peng-ju, QIAN Lin-gen, WU Qiang, HUANG Shan, CHEN Su. Impact of foundation pit dewatering and excavation with suspended waterproof curtain on adjacent high-speed railway piers [J]. Shandong Science, 2022, 35(6): 116-122.
[6]	DONG Hui,REN Xu-yun. Analysis of hydrate and sand particle movement based on DEM-CFD coupling method [J]. Shandong Science, 2022, 35(3): 123-130.
[7]	WANG Xiao-yu,ZHANG Yu-xiang. Heat transfer performance of heat exchanger tubes with inserted central inclined rod [J]. Shandong Science, 2022, 35(3): 35-42.
[8]	JI Can, LIU Zhi-gang, LÜ Ming-ming. Numerical investigation of the flash evaporation process inside a nozzle with two S-shaped internal vanes in a waste heat power generation system [J]. Shandong Science, 2021, 34(6): 77-82.
[9]	GAO Guo-qiang, CHEN Guo-fu. A new heat transfer calculation model for oil reservoirs with multiple fluids [J]. Shandong Science, 2021, 34(5): 49-57.
[10]	JI Jun-na. Numerical simulation of slope wave overtopping under the protection of fence panels [J]. Shandong Science, 2021, 34(4): 14-20.
[11]	HUO Mu-jie, BIE Hai-yan, LIN Zi-xin, AN Wei-zhong. Evaluating the performance of external-drive rotary pressure exchanger with tilted rotor runner [J]. Shandong Science, 2020, 33(6): 16-21.
[12]	LIU Jin, JIANG Hui-lue, LIU Bo, DU Da-wei. External flow field analysis and streamlined improvement of a car [J]. Shandong Science, 2020, 33(3): 87-92.
[13]	XING Tian-tian, WANG Gui-qing, TIAN Chang-wen. Simulation and optimization of the casting process for the large aluminum alloy beam based on ProCAST [J]. Shandong Science, 2019, 32(5): 76-80.
[14]	WEN Yong-qi, XIE Dong-fan, WANG Xiang, ZHOU Hao. Lane-changing strategy based on inter-vehicle communication [J]. Shandong Science, 2019, 32(4): 46-55.
[15]	TANG Sheng,ZHAO Yao-hua， DIAO Yan-hua,QUAN Zhen-hua. Thermal performance of a new kind of heat sink fabricated by flat aluminum multiport extruded tubes for electronic devices cooling [J]. SHANDONG SCIENCE, 2018, 31(3): 39-47.

Simulation of casting process for large aluminum alloy impeller based on MAGMASOFT

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 0