基于PLC的起重机主梁加工设备控制系统设计

doi:10.3976/j.issn.1002-4026.2021.01.014

Abstract

Abstract: Aiming at the production characteristics and processing mode of crane main beam, a control system of crane main beam processing equipment based on PLC(programmable logic controller) was developed. The hardware composition and software design of the control system and the processing flow of the crane main beam processing equipment were introduced, and the PLC program of each control part was compiled according to the mechanic flow. The designed processing system realizes the automatic production of crane main beam, and it can process a single-section crane girder with a length of 6 m at one time, work efficiency was improved greatly. The practice shows that the system works stably, has high reliability and has practical value in engineering.

Key words: crane main beam, PLC, man-machine interface, control system

CLC Number:

TP271

WU Hao, WANG Peng, CHEN Tie, ZHANG Shu-wen. Design of a control system for the crane-main-beam processing equipment based on PLC[J].Shandong Science, 2021, 34(1): 113-120.

References 9

1	刘辉. 重型桥式起重机介绍及主梁设计探究[J]. 内燃机与配件, 2018(3): 90-91. doi: 10.3969/j.issn.1674-957X.2018.03.040
2	李辉，王继宗，韩飞跃.重型桥式起重机介绍及主梁设计[J].冶金设备，2013（增刊2）：55-57. doi: 10.3969/j.issn.1001-1269.2013.z2.018
3	赵敬云,李强,朱绘丽.桥式起重机主梁一次成型技术应用与仿真分析[J].河南机电高等专科学校学报,2015,23(4):1-4. doi: 10.3969/j.issn.1008-2093.2015.04.001
4	刘晓丽,李晓红.基于PLC的建筑砌块成型机液压系统设计[J].机床与液压, 2017, 45(2): 106-109. doi: 10.3969/j.issn.1001-3881.2017.02.028
5	彭继慎,任宝栋.基于PLC和触摸屏技术地压铸机控制系统研究[J].特种铸造机有色金属,2006,26(3):154-155.
6	张淑侠. 基于PLC自动送料机控制系统的设计与实现[J]. 电声技术, 2019, 43(8): 49-52. doi: 10.16311/j.audioe.2019.08.014
7	曹忠亮,曹孝文,郭建华.基于PLC的三面铣组合机床控制系统研究[J].组合机床与自动化加工技术, 2017(2): 86-88. doi: 10.13462/j.cnki.mmtamt.2017.02.021
8	史宜巧, 孙业明, 景绍学. PLC技术及应用:项目教程[M]. 北京: 机械工业出版社, 2009.
9	刘艳梅,陈震,李一波，等．三菱 PLC 基础与系统设计［M］．北京:机械工业出版社，2009.

[1]	QIAN Guiying, QIAN Yunying, WU Xiaoming, JIN Fengzhu. Analysis of the contents of active ingredients in Lonicerae japonicae flos based on UPLC-MS/MS combined with chemometrics [J]. Shandong Science, 2023, 36(5): 1-8.
[2]	LI Wei, ZHANG Shoushuai. Train control method for high-speed railways combining“hit-hard-wall” and “hit-soft-wall” control modes [J]. Shandong Science, 2023, 36(5): 85-92.
[3]	WANG Changlin, GAO Mingzhou, GUO Yinghui, SUN Ya, YU Xiaojun, YAN Zhi, WANG Jieqiong, QIAO Mingqi. Identification of rutin metabolites and analysis of rutin metabolic pathway in rats [J]. Shandong Science, 2023, 36(5): 9-18.
[4]	WU Dan, HUANG Biyun, WANG Jing, LIU Long. Simultaneous determination of calycosin 7-O-glucoside, hesperidin, and ammonium glycyrrhizinate in Buzhongyiqi Pills via UPLC-Q/Orbitrap HRMS [J]. Shandong Science, 2023, 36(2): 16-22.
[5]	TIAN Xuan, LIU Yu, ZHU Wen-qing, ZHENG Zhen-Jia. Identification of antioxidant components in peony flowers through on-line screening using high performance liquid chromatography-quadrupole time of flight mass spectrometer [J]. Shandong Science, 2022, 35(5): 10-15.
[6]	DENG Zhi-Peng, LI Jing, ZHAO Pan, SONG Jia. Determining the concentration of tectochrysin in rat plasma using HPLC-MS/MS [J]. Shandong Science, 2022, 35(4): 21-27.
[7]	YUAN Min, LIANG Rui-xue, LIU Qing. Quality control of berberine and leonurine in Lishitonglin Granules [J]. Shandong Science, 2021, 34(4): 26-33.
[8]	ZHANG Xian, LI Yue. Analysis of flavonoids in mulberry leaves from different production areas [J]. Shandong Science, 2021, 34(4): 34-39.
[9]	HAO Zong-rui, LI Chao, ZHANG Hao, HUA Zhi-li , REN Wan-long. Control and realization of an active striking box wave maker based on PLC and servo motor [J]. Shandong Science, 2020, 33(3): 40-44.
[10]	SUN Zhi-qiang, WANG Xiao. Quality analysis of Semiaquilegiae Radix of different origins based on haracteristic fingerprint and content determination of two components [J]. Shandong Science, 2020, 33(1): 16-23.
[11]	SUN Jing, WEI Yong-li , LI Ke-ming , LIANG Kun . Determination of paeonol and paeoniflorin contents in the leaves of Paeonia suffruticosa from six growing areas using HPLC [J]. Shandong Science, 2020, 33(1): 24-28.
[12]	MU Yan, LI Li-li, MA Shuang-shuang, SONG Yue, Wang Quan-bo. Metabolomics mechanism of Pb²⁺induced cytotoxicity to microglial cells [J]. Shandong Science, 2019, 32(6): 26-33.
[13]	WANG Xiao, LI Yuan-yuan, SUN Zhi-qiang, WU Ming-ze, GAO Peng, DAI Long. Aesculetin content determination and characteristic HPLC chromatogram of Violae Herba obtained from different habitats [J]. Shandong Science, 2019, 32(4): 24-31.
[14]	WU Dan, WANG Jing, Huang Bi-yun, WANG Yan, LIU Long. Simultaneous determination of six components in Bidens parviflora Willd. by UPLC-MS/MS [J]. Shandong Science, 2019, 32(3): 16-22.
[15]	HU Yu-fen, WANG Li-juan, XUE Fu-min. Determination of mupirocin in different ointments by HPLC-MS [J]. Shandong Science, 2019, 32(3): 118-122.

Design of a control system for the crane-main-beam processing equipment based on PLC

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References 9

Related Articles 15

Metrics

Comments

Recommended 0