V8进气管金属型重力铸造计算机模拟

Abstract

Abstract:

We employed the software, Anycasting, to simulate filling and solidification for an intake pipe metallic gravity cast. We also compared the influences of singleside and doubleside bottom pouring processing schemes. Results show that the filling state of singleside bottom pouring scheme is more optimal. Its feeding channel is clear,the shrinkage and the dispersed shrinkage are basically eliminated.

Key words: intake pipe, casting, filling, solidification, computer simulation

CLC Number:

TG244

LIU Yun-Teng, JIANG Li-Kun, ZHAO De-Gang, TIAN Chang-Wen, SHI Ju-Peng. A computer simulation of metal mold gravity casting of V8 intake pipe[J].J4, 2011, 24(4): 28-31.

References

Metrics

Comments

Recommended 0

Open Access This article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits third parties to freely share (i.e., copy and redistribute the material in any medium or format) and adapt (i.e., remix, transform, or build upon the material) the articles published in this journal, provided that appropriate credit is given, a link to the license is provided, and any changes made are indicated. The material may not be used for commercial purposes. For details of the CC BY-NC 4.0 license, please visit: https://creativecommons.org/licenses/by-nc/4.0

[1]	YANG An’an, HAN Xingyu, TIAN Kuang, LIU Zeyuan, MING Wei. Study on short-term passenger flow prediction for a subway airport line based on Stacking ensemble learning [J]. Shandong Science, 2024, 37(4): 112-120.
[2]	ZHANG Guojian, MENG Hao, XIONG Wei, BAI Tao, MENG Xianchen, WANG Jun, LÜ Xiao. Predicting surface movement and deformation for continuous mining and continuous backfilling under an artificial lake [J]. Shandong Science, 2023, 36(5): 33-43.
[3]	SONG Wen-ting, ZHANG Su-qing, LIU Ke-gao. Effect of C particles on the as-cast microstructure of Cp/AZ91D composites [J]. Shandong Science, 2020, 33(5): 57-66.
[4]	ZHANG Ke, ZHU Yuan-qi, SHEN Jie, YANG Zi-fan, QIAN Hui-min, WANG Bei-bei. Arrival time filling method based on bus operation data [J]. Shandong Science, 2020, 33(4): 83-90.
[5]	XING Tian-tian, WANG Gui-qing, TIAN Chang-wen. Simulation and optimization of the casting process for the large aluminum alloy beam based on ProCAST [J]. Shandong Science, 2019, 32(5): 76-80.
[6]	GAO Meng-qi, CHANG Xi-ming, WANG Huan. Short-term forecasting of the subway passenger flow based on wavelet decomposition and long short-term memory network [J]. Shandong Science, 2019, 32(4): 56-63.
[7]	ZHAO Ming-xian, RAO Bi-yu, WANG Jing. Study on leakage forecast and leakage reduction of urban water supply pipeline network based on set pair analysis [J]. SHANDONG SCIENCE, 2018, 31(2): 120-126.
[8]	CHEN Sheng-bo, LIU Yong-ping, HE Shi-wei, LI Hao-dong. Research on integrated optimization of double stack car carriers based vehicle loading and routing problems in vehicle logistics [J]. SHANDONG SCIENCE, 2017, 30(3): 73-81.
[9]	WANG Maoli, HAO Huijuan,ZHAO Xue，SUN Xiang. SK-PLC based special control system for highspeed filling line [J]. SHANDONG SCIENCE, 2016, 29(1): 116-120.
[10]	ZHOU Wei, JIA Yuan-Hua, CHEN Feng. Research on short term traffic volume forecasting approaches for the urbanized section of a freeway [J]. J4, 2012, 25(4): 53-57.
[11]	TANG Shou-Qiu, ZHOU Ji-Xue, TIAN Chang-Wen, LI Wei-Hong, YANG Yuan-Sheng. Significance and research advances of directional solidification of magnesium alloys [J]. J4, 2011, 24(4): 18-22.

A computer simulation of metal mold gravity casting of V8 intake pipe

PDF (PC)

Like

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 11

Metrics

Comments

Recommended 0