| 1 |
WANG G L, ZHAO G Q, WANG J C, et al. Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding[J]. Polymer Engineering & Science, 2015, 55(4): 807-835.
doi: 10.1002/pen.23948
|
| 2 |
WU H, ZHAO G Q, WANG G L, et al. A new core-back foam injection molding method with chemical blowing agents[J]. Materials & Design, 2018, 144: 331-342.
doi: 10.1016/j.matdes.2018.02.043
|
| 3 |
ZHANG L, ZHAO G Q, WANG G L. Formation mechanism of porous structure in plastic parts injected by microcellular injection molding technology with variable mold temperature[J]. Applied Thermal Engineering, 2017, 114: 484-497.
doi: 10.1016/j.applthermaleng.2016.11.180
|
| 4 |
ZHANG X L,LI B W,WANG X H,et al.Modification of iPP microcellular foaming behavior by thermal history control and nucleating agent at compressed CO2[J].The Journal of Supercritical Fluids, 2018, 133: 383-392.
doi: 10.1016/j.supflu.2017.11.003
|
| 5 |
K-HNE U. 21st IKV international plastics technology colloquium A commentated review[J]. Macromolecular Materials and Engineering, 2002, 287(5):373.
doi: 10.1002/1439-2054(20020501)287:5<373::aid-mame373>3.0.co;2-9
|
| 6 |
李从威, 周南桥, 王全新. 微孔发泡注射成型设备及技术研究进展[J]. 工程塑料应用, 2008, 36(10): 76-80.
doi: 10.3969/j.issn.1001-3539.2008.10.020
|
| 7 |
HUANG H X, WANG J K. Equipment development and experimental investigation on the cellular structure of microcellular injection molded parts[J]. Polymer Testing, 2008, 27(4): 513-519.
doi: 10.1016/j.polymertesting.2008.02.009
|
| 8 |
HECK R. A review of commercially used chemical foaming agents for thermoplastic foams[J]. Journal of Vinyl and Additive Technology, 1998, 4(2): 113-116.
doi: 10.1002/vnl.10027
|
| 9 |
REEDY M. New chemical foaming agents expand wood/plastic composite market[J]. Plastics, Additives and Compounding, 2002,4(5): 24-26.
doi: 10.1016/s1464-391x(02)80114-3
|
| 10 |
陈立军,陈焕钦.发泡剂在绝缘材料中的应用[J].绝缘材料,2005, 38(2): 13-16.
doi: 10.3969/j.issn.1009-9239.2005.02.013
|
| 11 |
YANG W J. Method of injection molding a foamed resin product having a smooth surface involving surface heating of the mold by applying high current low voltage electric power: US19820337852[P]. 1983-06-28.
|
| 12 |
CHA S W, YOON J D. The relationship of mold temperatures and swirl marks on the surface of microcellular plastics[J]. Polymer-Plastics Technology and Engineering, 2005, 44(5): 795-803.
doi: 10.1081/pte-200060811
|
| 13 |
BOCIAGA E, PALUTKIEWICZ P. The influence of injection molding parameters and blowing agent addition on selected properties, surface state, and structure of HDPE parts[J]. Polymer Engineering & Science, 2013, 53(4): 780-791.
doi: 10.1002/pen.23316
|
| 14 |
BLEDZKI A K, FARUK O. Microcellular wood fiber reinforced PP composites: cell morphology, surface roughness, impact, and odor properties[J]. Journal of Cellular Plastics, 2005, 41(6): 539-550.
doi: 10.1177/0021955x05059033
|
| 15 |
蒋团辉. 微发泡过程装置设计及过程研究[D]. 贵阳: 贵州大学, 2009.
|
| 16 |
董桂伟. 微孔发泡注塑成型技术及其产品泡孔结构形成过程和演变规律研究[D]. 济南: 山东大学, 2015.
|
| 17 |
CHEN S C, LIN Y W, CHIEN R D, et al. Variable mold temperature to improve surface quality of microcellular injection molded parts using induction heating technology[J]. Advances in Polymer Technology, 2008, 27(4): 224-232.
doi: 10.1002/adv.20133
|
| 18 |
CHEN H L, CHIEN R D, CHEN S C. Using thermally insulated polymer film for mold temperature control to improve surface quality of microcellular injection molded parts[J]. International Communications in Heat and Mass Transfer, 2008, 35(8):991-994.
doi: 10.1016/j.icheatmasstransfer.2008.04.017
|
| 19 |
LEE J, TURNG L S. Improving surface quality of microcellular injection molded parts through mold surface temperature manipulation with thin film insulation[J]. Polymer Engineering & Science, 2010, 50(7): 1281-1289.
doi: 10.1002/pen.21658
|
| 20 |
LEE J, TURNG L S, DOUGHERTY E, et al. A novel method for improving the surface quality of microcellular injection molded parts[J]. Polymer, 2011, 52(6): 1436-1446.
doi: 10.1016/j.polymer.2011.01.026
|
| 21 |
PENG J, TURNG L S, PENG X F. A new microcellular injection molding process for polycarbonate using water as the physical blowing agent[J]. Polymer Engineering & Science, 2012, 52(7): 1464-1473.
doi: 10.1002/pen.23092
|
| 22 |
陈志雄, 叶智方, 李向东, 等. 反压法化学发泡高速注塑成型方法: CN101007437A[P]. 2007-08-01.
|
| 23 |
LI S, ZHAO G Q, WANG G L, et al. Influence of relative low gas counter pressure on melt foaming behavior and surface quality of molded parts in microcellular injection molding process[J]. Journal of Cellular Plastics, 2014, 50(5): 415-435.
doi: 10.1177/0021955x14525961
|
| 24 |
李帅, 赵国群, 管延锦, 等. 模具型腔气体压力对微发泡注塑件表面质量的影响[J]. 机械工程学报, 2015, 51(10): 79-85.
doi: 10.3901/JME.2015.10.079
|
| 25 |
朱敏杰. 改性聚苯醚发泡反压成型新工艺[J]. 模具工业, 1990, 16(9): 31-33.
doi: 10.16787/j.cnki.1001-2168.dmi.1990.09.016
|
| 26 |
WU J S, LEE M J. Studies on gas counter pressure and low-pressure structural foam molding. 1. Process design and effect of processing conditions on surface quality of molded parts [J]. Plastics rubber and composites processing and applications, 1994, 21(3): 163-171.
|
| 27 |
CHEN S C, LIAO W H, CHIEN R D. Structure and mechanical properties of polystyrene foams made through microcellular injection molding via control mechanisms of gas counter pressure and mold temperature[J]. International Communications in Heat and Mass Transfer, 2012, 39(8): 1125-1131.
doi: 10.1016/j.icheatmasstransfer.2012.06.015
|
| 28 |
CHEN S C, HSU P S, HWANG S S. The effects of gas counter pressure and mold temperature variation on the surface quality and morphology of the microcellular polystyrene foams[J]. Journal of Applied Polymer Science, 2013, 127(6): 4769-4776.
doi: 10.1002/app.37994
|
