塑性变形工艺在变形镁合金晶粒细化中的应用

doi:10.3976/j.issn.1002-4026.2017.01.006

Abstract

Abstract:

In this paper, the applications of different various plastic deformation processing, such as hot extrusion, rolling and large plastic deformation, on grain refinement of wrought magnesium alloy were reviewed systematically. The high cost of related products caused by low processing speed has been regarded as one of the main factors limiting the development of wrought magnesium alloys. But in the future, this problem can be solved by semicontinuous casting preparation of large size using multioutfield and rapid processing of fine grained magnesium alloys.

Key words: wrought, mechanism, magnesium alloys, grain refinement

CLC Number:

TG146.2

ZHANG Di, LIN Tao,ZHOU Ji-xue, ZHAO Zhong-kui, LIU Yun-teng. Recent developments in grain refinement through plastic deformation for wrought magnesium alloy[J].SHANDONG SCIENCE, 2017, 30(1): 33-40.

References

［1］徐绍勇, 龙思远, 曹凤红. 热处理对挤锻复合成形AZ61镁合金组织与性能的影响［J］. 热加工工艺, 2010, 39(24):199-203.
［2］BETTLES C，BARNETT M. Advances in wrought magnesium alloys［M］. Cambridge,UK:Woodhead Publishing， 2012.
［3］HALL E O. The deformation and ageing of mild steel: iii discussion of results［J］. Proceedings of the Physical Society, Section B， 1951, 64(9):747-753.
［4］PETCH N J. The cleavage strength of polycrystals［J］. J Iron Steel Inst, 1953, 174:25-28.
［5］SONG C J, HAN Q Y, ZHAI Q J. Review of grain refinement methods for ascast microstructure of magnesium alloy［J］. China Foundry, 2009, 6(2):93-103.
［6］严凯, 孙扬善, 白晶,等. ECAP对粗晶AZ31镁合金的晶粒细化机制的影响［J］. 热加工工艺, 2011, 40(10):70-73.
［7］WANG S R, SONG L H, KANG S, et al. Deformation behavior and microstructure evolution of wrought magnesium alloys［J］. Chinese Journal of Mechanical Engineering, 2013, 26(3):437-447.
［8］应韬. ECAP变形对AZ91镁屑固相成形材料显微组织与力学性能的影响［D］. 哈尔滨:哈尔滨工业大学, 2009.
［9］夏翠芹, 刘平, 任凤章,等. 细晶变形镁合金的研究进展［J］. 材料导报, 2006, 20(9):89-92.
［10］万迪庆, 袁艳平, 周新建. 高强镁合金组织细化方法研究现状［J］. 材料导报, 2015, 29(9):76-80.
［11］李玉娟, 汤爱涛. 镁合金晶粒细化的研究进展［J］. 材料导报, 2013, 27(17):125-130.
［12］高声远, 张志强, 乐启炽,等. MgCO3在AZ31镁合金中的细化效果及机理［J］. 材料科学与工艺,2011,19(3):49-52.
［13］ LEIL T A, HORT N, DIETZEL W, et al. Microstructure and corrosion behavior of MgSnCa alloys after extrusion［J］. Transactions of Nonferrous Metals Society of China, 2009, 19(1):40-44.
［14］ YANG W P, GUO X F. A high strength Mg-6Zn-1Y-1Ce alloy prepared by hot extrusion［J］. Journal of Wuhan University of Technology(Materials Science Edition), 2013, 28(2):389-395.
［15］ ZHOU H, WANG Q D, CHEN J, et al. Microstructure and mechanical properties of extruded Mg8.5Gd2.3Y1.8Ag0.4Zr alloy［J］. Transactions of Nonferrous Metals Society of China,2012,22（8）:1891-1895.
［16］ LIU K , WANG Q F, DU W B, et al. Microstructure and mechanical properties of extruded Mg6ZnxEr alloys［J］. Transactions of Nonferrous Metals Society of China, 2013, 23(10):2863-2873.
［17］吕滨江, 彭建, 童小山,等. 挤压温度对Mg-2.0Zn-0.3Zr-0.9Y新型镁合金组织和性能的影响［J］. 稀有金属材料与工程, 2013, 42(4):841-844.
［18］梁书锦, 王欣, 刘祖岩,等. AZ31镁合金不同温度挤压后组织性能研究［J］. 稀有金属材料与工程, 2009, 38(7):1276-1279.
［19］ CHENG W L, HUO R, TIAN Q W, et al. Dependence of microstructure, texture and tensile properties on working conditions in indirectextruded Mg6Sn alloys［J］. Rare Metal Materials & Engineering, 2015, 44(9):2132-2137.
［20］程伟丽, 霍瑞, 陆杨婕,等. 超细晶反挤压Mg-8Sn-1Al-1Zn合金的组织和性能［J］. 稀有金属材料与工程, 2014,43(11):2824-2828.
［21］陈维平, 陈宛德, 詹美燕,等. 轧制温度和变形量对AZ31镁合金板材组织和硬度的影响［J］. 特种铸造及有色合金, 2007, 27(5):338341.
［22］ MIAO Q, HU L X, SUN H F, et al. Grain refining and property improvement of AZ31 Mg alloy by hot rolling［J］. Transactions of Nonferrous Metals Society of China, 2009, 19(S2):s326-s330.
［23］ WANG X, CHEN W Z, HU L X, et al. Microstructure refining and property improvement of ZK60 magnesium alloy by hot rolling［J］. Transactions of Nonferrous Metals Society of China, 2011, 21(S2):s242-s246.
［24］ GUO F, ZHANG D F, YANG X S, et al. Microstructure and texture evolution of AZ31 magnesium alloy during large strain hot rolling ［J］. Transactions of Nonferrous Metals Society of China, 2015, 25 (1): 14-21.
［25］丁茹, 王伯健, 任晨辉,等. 异步轧制AZ31镁合金板材的晶粒细化及性能［J］. 稀有金属, 2010, 34(1):34-37.
［26］孟强, 蔡庆伍, 江海涛,等. 异步轧制对AZ31镁合金静态再结晶及晶粒细化的影响［J］. 北京科技大学学报, 2011, 33(1):47-52.
［27］张文玉, 刘先兰. 异步轧制技术及其在镁合金中的应用［J］. 锻压技术, 2008, 33(2):1-5.
［28］ WANG L P, CHEN T, JIANG W Y, et al. Microstructure and mechanical properties of AM60B magnesium alloy prepared by cyclic extrusion compression［J］. Transactions of Nonferrous Metals Society of China, 2013, 23 (11):3200-3205.
［29］宋佩维. 往复挤压Mg-4Al-4Si镁合金的显微组织与力学性能［J］. 中国有色金属学报, 2012, 22(7):1863-1870.
［30］ CHEN Y J, WANG Q D, LIN J B, et al. Grain refinement of magnesium alloys processed by severe plastic deformation［J］. Transactions of Nonferrous Metals Society of China, 2014, 24 (12): 3747-3754.
［31］符韵, 鲁美琪, 陈毅挺,等. 等径道角挤压工艺对铸态AZ91D镁合金组织的影响［J］. 精密成形工程, 2014,6(5):64-68.
［32］严凯, 孙扬善, 白晶,等. ECAP对粗晶AZ31镁合金的晶粒细化机制的影响［J］. 热加工工艺, 2011, 40(10):70-73.
［33］何运斌, 潘清林, 刘晓艳,等. ECAP法制备细晶ZK60镁合金的微观组织与力学性能［J］. 材料工程, 2011(6):32-38.
［34］李英杰, 张秀芝, 李锋,等. 等通道转角挤压Mg1Zn2Nd合金的力学性能［J］. 特种铸造及有色合金, 2010, 30(5):408-411.
［35］ YANG H J , AN X H, SHAO X H, et al. Enhancing strength and ductility of Mg12Gd3Y0.5Zr alloy by forming a biultrafine microstructure［J］. Materials Science and Engineering A, 2011, 528(13/14):4300-4311.
［36］张金龙,赵西成,谢辉. 镁合金等径角挤压组织细化及演变机理［J］.西安航空学院学报,2014,32(5):30-34.
［37］ SUN H F, LI C J, XIE Y, et al. Microstructures and mechanical properties of pure magnesium bars by high ratio extrusion and its subsequent annealing treatment［J］. Transactions of Nonferrous Metals Society of China, 2012, 22(12):4667-4677.
［38］中华人民共和国国家质量监督检验检疫总局，中国国家标准化管理委员会.GBT3190—2008变形铝及铝合金化学成分［S］.北京：中国标准出版社，2008.

[1]	LIU Shuang, DONG Hongjing, CHEN Panpan, WANG Xiao. Research progress on the mechanisms by which natural phenolic compounds alleviate hyperuricemia [J]. Shandong Science, 2024, 37(2): 12-19.
[2]	LUO Yaqin, HUANG Wei. Progress in the research on the mechanism of action of Scutellaria baicalensis and its active ingredients in treating ulcerative colitis [J]. Shandong Science, 2024, 37(2): 20-28.
[3]	LIU Kechun, WANG Yongcheng, ZANG Xiaohan, XIA Qing, ZHANG Yun, ZHANG Shanshan, SUN Chen. Advancements in network pharmacology and zebrafish modeling for studying traditional Chinese medicine’s effective substances and mechanisms of action [J]. Shandong Science, 2024, 37(2): 29-35.
[4]	FU Zhaoju, CHENG Guo, LIN Dengmei, LI Jun, ZHANG Nannan. Experimental study and network pharmacological analysis of the anti-inflammatory action mechanism of Mahonia bealei (Fort.) Carr. [J]. Shandong Science, 2024, 37(1): 24-31.
[5]	ZHANG Hanxiao, LIU Yuran, LIU Yuan, NIU Zichen. A multitask learning model for the prediction of short-term subway passenger flow [J]. Shandong Science, 2024, 37(1): 95-106.
[6]	HE Zhenbo, ZHANG Li, GAO Mingxin, LUAN Lingyu. Research progress of green scale inhibitors for circulating cooling water [J]. Shandong Science, 2023, 36(5): 102-120.
[7]	WEN Yuya, DONG Ting, JIANG Zhangsheng, CHEN Jie, TIAN Liwei, ZHAO Chenling, TANG Lulu. The mechanism of Gandouling tablet in alleviating hepatolenticular degeneration neuroinflammation via the regulation of the TLR4/NF-κB/NLRP3 signaling pathway [J]. Shandong Science, 2023, 36(4): 42-51.
[8]	YIN Zhipeng, GAO Yunyun, LIU Wenwen, GUO Pengbo, ZHAO Yinghui. Exploring the mechanism of Xiangsha Liujunzi Decoction in treating Helicobacter pylori-associated gastritis based on network pharmacology and molecular docking technology [J]. Shandong Science, 2023, 36(4): 52-60.
[9]	SUN Tiefeng, DONG Limin, JIAO Ziqi, WANG Ping. Exploration of the dosing pattern and anti-respiratory syncytial virus mechanism of traditional Chinese medicine based on data mining and network pharmacology [J]. Shandong Science, 2023, 36(3): 1-9.
[10]	ZHU Jie, WANG Zheng, LIANG Yanni. The mechanism of Xiaoqinglong Decoction in treatment of COVID-19 based on network pharmacology [J]. Shandong Science, 2023, 36(3): 10-17.
[11]	ZHAO Xin, HUANG Biyun, WU Dan, ZHANG Mei. The mechanism of Guishaozhenxian Tablet in the treatment of temporal lobe epilepsy based on network pharmacology and molecular docking [J]. Shandong Science, 2023, 36(3): 27-37.
[12]	ZHUANG Hao, LI Yang, TAO Mingkun. CNN-LSTM driver intention recognition method based on Attention mechanism [J]. Shandong Science, 2023, 36(2): 103-111.
[13]	LIU Wenwen, LI Changgeng, KONG Na, LIU Shuang, DONG Hongjing. Study on the mechanism of Shiweiyipi Granules based on network pharmacology and molecular docking [J]. Shandong Science, 2023, 36(2): 33-40.
[14]	LI Yan, LI Ziwen, LI Limin, WANG Mengxia, ZHANG Peng, WU Zhengzhi. Exploring the mechanism of Mori Cortex in the treatment of type 2 diabetes mellitus based on network pharmacology [J]. Shandong Science, 2023, 36(1): 41-50.
[15]	PENG Peng, JIA Shun-ping. Diversion parking guidance strategy of shared bicycles under reward mechanism considering user preference [J]. Shandong Science, 2022, 35(6): 123-130.

Recent developments in grain refinement through plastic deformation for wrought magnesium alloy

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 0