J4 ›› 2012, Vol. 25 ›› Issue (5): 58-62.doi: 10.3976/j.issn.1002-4026.2012.05.013

• 目录 • 上一篇    下一篇

SH-1型组装式大型浮标的设计

万晓正,范秀涛,周伟,陈世哲,刘世萱   

  1. 山东省科学院海洋仪器仪表研究所,山东 青岛 266001
  • 收稿日期:2012-03-14 出版日期:2012-10-20 发布日期:2012-10-20
  • 作者简介:万晓正(1983-),男,研究实习员,研究方向为机械电子。Email:18661817997@163.com
  • 基金资助:

    国家高技术研究发展计划(863计划)资助课题(2008AA09A401-1)

Design of a SH-1 assembled big buoy

 WAN Xiao-Zheng, FAN Xiu-Tao, ZHOU Wei, CHEN Shi-Zhe, LIU Shi-Xuan   

  1. Institute of Oceanographic Instrumentation,Shandong Academy of Sciences,Qindao 266001,China
  • Received:2012-03-14 Online:2012-10-20 Published:2012-10-20

摘要:

针对整体式大型海洋资料浮标海上生存能力不强,加工制造、布放运输不便等问题,设计了一种直径为6 m的组装式的大型浮标。利用船舶静力学的计算方法,确定了浮标的型深为2.2 m、重心高为0.9 m以及其他基本参数,并对浮标的稳性衡准数进行校核,结果满足使用要求。该设计为浮标加工质量的可控性提供了合理化依据。

关键词: 浮标, 型深, 重心高, 稳性衡准数

Abstract:

We design a big assembled buoy of 6 m diameter in view of the weak viability of a big overall oceanographic data buoy and the inconvenience of its manufacture and transport. We also employ Ship Static calculation method to determine such basic parameters of the buoy as molded depth of 2.2 m and height of gravitational center of 0.9 m. We then check the stability criteria of the assembled buoy based on the ship stability specification and obtain an assembled buoy satisfying the requirement of usage. The design provides a rational basis for the controllability of buoy manufacture quality.

Key words: buoy, depth of hull, height of gravitational center, stability criteria

中图分类号: 

  • P715.2

开放获取 本文遵循知识共享-署名-非商业性4.0国际许可协议(CC BY-NC 4.0),允许第三方对本刊发表的论文自由共享(即在任何媒介以任何形式复制、发行原文)、演绎(即修改、转换或以原文为基础进行创作),必须给出适当的署名,提供指向本文许可协议的链接,同时表明是否对原文作了修改,不得将本文用于商业目的。CC BY-NC 4.0许可协议详情请访问 https://creativecommons.org/licenses/by-nc/4.0