基于ProCAST的大型铝合金横梁铸造过程模拟及工艺方案优化

doi:10.3976/j.issn.1002-4026.2019.05.009

Shandong Science ›› 2019, Vol. 32 ›› Issue (5): 76-80.doi: 10.3976/j.issn.1002-4026.2019.05.009

Previous Articles Next Articles

Simulation and optimization of the casting process for the large aluminum alloy beam based on ProCAST

XING Tian-tian¹, WANG Gui-qing¹ ，TIAN Chang-wen²

1.School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250100, China; 2.Advanced Materials Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China

Received:2019-07-24 Online:2019-10-20 Published:2019-10-09

Abstract

Abstract: The casting process simulation software ProCAST was used to simulate the filling and solidification process of the sand gravity casting of the large aluminum alloy. The location of the casting defects was predicted, and their causes were analyzed.Based on that,the cooling effect was enhanced by rationally adjusting the pouring riser system and cold iron in special area.The casting process plan was optimized, which laid the foundation for process implementation.

Key words: ProCAST, aluminum alloy, casting process simulation, process optimization

CLC Number:

TG249.2

XING Tian-tian, WANG Gui-qing, TIAN Chang-wen. Simulation and optimization of the casting process for the large aluminum alloy beam based on ProCAST[J].Shandong Science, 2019, 32(5): 76-80.

References 11

1	濮雍，周鹏飞，陈龙. 一种激光切割机横梁的优化设计方法[J]. 锻压装备与制造技术，2017，52(4)：22-24. doi: 10.16316/j.issn.1672-0121.2017.04.006
2	金俊尉. 横梁倒挂式激光切割机的结构优化设计[D]. 南京：南京航空航天大学，2015.
3	KWON H J, KWON H K. Computer aided engineering (CAE) simulation for the design optimization of gate system on high pressure die casting (HPDC) process[J]. Robotics and Computer Integrated Manufacturing，2019,55（B）：147-153. doi: 10.1016/j.rcim.2018.01.003
4	孔维兵，胡心平，王洪飞，等.铝镁合金金属型拉伸试样铸造工艺的优化[J].铸造技术，2016，37(1)：83-86. doi: 10.16410/j.issn1000-8365.2016.01.023
5	李红强，石红利，尹珍珍. 充型凝固仿真辅助GIS连接壳体工艺设计[J].铸造设备与工艺，2018(6):28-32. doi: 10.16666/j.cnki.issn1004-6178.2018.06.008
6	阚精诚，刘继广，杨友文，等. 铸造充型过程数值模拟技术的研究现状与展望[J]. 热加工工艺,2019(13):9-13. doi: 10.14158/j.cnki.1001-3814.2019.13.003
7	李日.铸造工艺仿真ProCAST从入门到精通[M].北京：中国水利水电出版社，2010.
8	刘晨，米国发，王有超，等. 横梁铸钢件砂型铸造数值模拟及工艺优化[J].特种铸造及有色合金，2016，36(12)：1266-1269. doi: 10.15980/j.tzzz.2016.12.008
9	郭凯，何家宁，马迪，等. 龙门式机床横梁铸件残余应力分析[J]. 特种铸造及有色合金，2017，37(7)：719-721. doi: 10.15980/j.tzzz.2017.07.007
10	卫东海，李克锐，张怀香，等.高精度保持性QT600-3横梁的铸造技术[J]. 现代铸铁，2018，38(3)：1-7. doi: 10.3969/j.issn.1003-8345.2018.03.001
11	ESI Software Inc. ProCAST User’s manual technical reference[EB/OL].［2019-06-20］.https://www.scribd.com/doc/90289252/ProCAST-User-Manual.

[1]	LI Zhi, LÜ Sheng-li, LI Yi-fei. Effect of stress level on mechanical properties of 2219 aluminum alloy caused by stress corrosion damage [J]. Shandong Science, 2019, 32(3): 48-56.
[2]	SUN De-zhi，WANG Gui-qing，TIAN Chang-wen. Simulation of casting process for large aluminum alloy impeller based on MAGMASOFT [J]. SHANDONG SCIENCE, 2018, 31(4): 44-49.
[3]	ZHANG Lin-Lin, WANG Xiu-Chun, NIU Yu-Chao, YI Xi-Bin, PAN Xi-Qing, WANG Jin-Wei. Silane processing of aluminum alloy [J]. SHANDONG SCIENCE, 2014, 27(4): 42-45.
[4]	WANG Xu, WU Si, LIU Yun-Teng, LI Wei-Hong, ZHOU Ji-Xue, TANG Shou-Qiu. Research advances of microalloying Al-Zn-Mg-(Cu) series aluminum alloy [J]. J4, 2014, 27(1): 56-62.
[5]	TIAN Chang-Wen. Effects of Al-Ti-C-B master alloy on the microstructure and mechanical properties of high aluminum zinc based alloy [J]. J4, 2012, 25(1): 51-55.

Simulation and optimization of the casting process for the large aluminum alloy beam based on ProCAST

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References 11

Related Articles 5

Metrics

Comments

Recommended 0