SHANDONG SCIENCE ›› 2017, Vol. 30 ›› Issue (2): 50-54.doi: 10.3976/j.issn.1002-4026.2017.02.008
• New Materials • Previous Articles Next Articles
XIU Da-peng1, NI Xiao-qing2, ZHANG Xin-en1
Received:
Online:
Published:
Abstract:
Directed against the performance degradation problem of domestic car plate steel due to increasing Si in molten steel during the smelting process, in this paper, the changes in the production of Si content in each smelting stage were studied. The influence factors of the molten steel raising Si mainly include slag basicity, and aluminum content in molten steel, tundish slag and tundish insulation material, etc. By the measures of choosing deoxidizer with Si content less than 1.5%, improving slag basicity by using the modification agent, and adopting alkali tundish, the mass fraction of molten steel increasing Si was controlled below 0.01% during the refining and continuous casting process.
Key words: Si content, slag basicity, vacuum decarburization
CLC Number:
XIU Da-peng, NI Xiao-qing, ZHANG Xin-en. The technical study on controlling Si content in car plate steel[J].SHANDONG SCIENCE, 2017, 30(2): 50-54.
0 / / Recommend
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
URL: https://www.sdkx.net/EN/10.3976/j.issn.1002-4026.2017.02.008
https://www.sdkx.net/EN/Y2017/V30/I2/50
[1]李清秀. 我国汽车板生产的现状及发展[J]. 中国科技博览,2012(11):1822. [2]李光瀛,马鸣图.我国汽车板生产现状及展望[J]. 轧钢,2014,31(4):2232. [3]中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. GB/T 700—2006 碳素结构钢[S]. 北京:中国标准出版社,2006. [4]隋亚飞,孙国栋,赵艳,等. IF钢中含Ti夹杂物的衍变规律[J]. 北京科技大学学报,2014,36(9):11741182. [5]胡宽辉,田德新,冯冠文,等. 汽车用热镀锌高强IF钢的研究进展[J]. 热加工工艺, 2010,39(18):3438. [6]赵渭良,贾耿伟,程迪,等. IF钢近表层夹杂物的演化规律及数值模拟研究[J]. 热加工工艺. 2015,44(9):142144. [7]李尚兵,王谦. 铝镁合金脱氧热力学分析与实验研究[J]. 铁合金. 2007(2):2327. [8]张春胜. 超低碳汽车板钢洁净度控制[J]. 武钢技术, 2014,52(4):1215. [9]胡大,周春泉,孙彦辉,等. CSP流程冷轧基板钢中Si的控制[J]. 河南冶金, 2006,14(增刊):137140.
Cited