1 |
张小丽, 陈雪峰, 李兵, 等. 机械重大装备寿命预测综述[J]. 机械工程学报, 2011, 47(11): 100-116.
doi: 10.3901/JME.2011.11.100
|
2 |
IOANNIDES E, HARRIS T.A new fatigue life model for rolling bearings[J]. Journal of Tribology, 1985, 107(3): 367-377.
doi: 10.1115/1.3261081
|
3 |
FATEMI A, YANG L. Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials[J]. International Journal of Fatigue, 1998, 20(1): 9-34.
doi: 10.1016/S0142-1123(97)00081-9
|
4 |
GRIFFITH A A VI. The phenomenon of rupture and flow in solids[J]. Philosophical Transactions of the Royal Society of London, Series A, 1921,221(582/583/584/585/586/587/588/589/590/591/592/593): 163-198.
doi: 10.1098/rsta.1921.0006
|
5 |
PARIS P C, ERDOGAN F. A critical analysis of crack propagation laws[J]. Journal of Basic Engineering, 1963, 85(4): 528-533.
doi: 10.1115/1.3656900
|
6 |
王英, 吕文元, 王奕娇, 等. 基于随机滤波法的滚动轴承剩余寿命预测[J]. 数学的实践与认识, 2013, 43(8): 189-196.
doi: 10.3969/j.issn.1000-0984.2013.08.026
|
7 |
申中杰, 陈雪峰, 何正嘉, 等. 基于相对特征和多变量支持向量机的滚动轴承剩余寿命预测[J]. 机械工程学报, 2013, 49(2): 183-189.
doi: 10.3901/jme.2013.02.183
|
8 |
BEZAZI A, PIERCE S G, WORDEN K, et al. Fatigue life prediction of sandwich composite materials under flexural tests using a Bayesian trained artificial neural network[J]. International Journal of Fatigue, 2007, 29(4): 738-747.
doi: 10.1016/j.ijfatigue.2006.06.013
|
9 |
MOHANTY J R, VERMA B B, RAY P K, et al. Application of artificial neural network for fatigue life prediction under interspersed mode-I spike overload[J]. Journal of Testing and Evaluation, 2010, 38(2): 101907.
doi: 10.1520/JTE101907
|
10 |
GEBRAEEL N, LAWLEY M, LIU R, et al. Residual life predictions from vibration-based degradation signals: a neural network approach[J]. IEEE Transactions on Industrial Electronics, 2004, 51(3): 694-700.
doi: 10.1109/TIE.2004.824875
|
11 |
ALI J B, FNAIECH N, SAIDI L, et al. Application of empirical mode decomposition and artificial neural network for automatic bearing fault diagnosis based on vibration signals[J]. Applied Acoustics, 2015, 89: 16-27.
doi: 10.1016/j.apacoust.2014.08.016
|
12 |
OCAK H, LOPARO K A. Estimation of the running speed and bearing defect frequencies of an induction motor from vibration data[J]. Mechanical Systems and Signal Processing, 2004, 18(3): 515-533.
doi: 10.1016/S0888-3270(03)00052-9
|
13 |
郑近德, 刘涛, 孟瑞, 等. 基于广义复合多尺度排列熵与PCA的滚动轴承故障诊断方法[J]. 振动与冲击, 2018, 37(20): 61-66.
|
14 |
DENG S, HUA L, HAN X H, et al. Analysis of surface crack growth under rolling contact fatigue in a linear contact[J]. Tribology Transactions, 2015, 58(3): 432-443.
doi: 10.1080/10402004.2014.983250
|
15 |
DENG S, QIN X P, HUANG S.A study on the effect of subsurface crack propagation on rolling contact fatigue in a bearing ring[J]. Journal of Mechanical Science and Technology, 2015, 29(3): 1029-1038.
doi: 10.1007/s12206-014-1114-2
|
16 |
LEI Z Q, HONG Y S, XIE J J, et al. Effects of inclusion size and location on very-high-cycle fatigue behavior for high strength steels[J]. Materials Science and Engineering: A, 2012, 558: 234-241.
doi: 10.1016/j.msea.2012.07.118
|