山东科学 ›› 2017, Vol. 30 ›› Issue (2): 133-138.doi: 10.3976/j.issn.1002-4026.2017.02.020

• 其他研究论文 • 上一篇    

汽车电子产品全寿命电磁兼容测试方法

李研强,张晓芳   

  1. 山东省科学院自动化研究所,山东省汽车电子技术重点实验室,山东 济南 250014
  • 收稿日期:2016-06-02
  • 作者简介:李研强(1977—),男,副研究员,研究方向为电磁兼容与汽车主动安全。E-mail:liyq@sdas.org
  • 基金资助:

    山东省科学院自然科学基金(201510015)

Whole life-cycle EMC testing method for automotive electronic products

LI Yan-qiang , ZHANG Xiao-fang   

  1. Shandong Provincial Key Laboratoty of Automotive Electronics Technology,Institute of Automation,Shandong Academy of Sciences, Jinan 250014,China
  • Received:2016-06-02

摘要:

目前,对汽车电子产品的电磁兼容测试主要集中在新产品研发阶段。本文提出了一种汽车电子产品全寿命电磁兼容测试方法,通过建立测试模型、退化模型及验证模型,进行了加速寿命试验。试验结果表明,在产品使用寿命期限内,随着使用时间的延长,电磁兼容性能逐渐变差,在某个阶段会超出电磁兼容测试标准的限值要求,进而影响到整车的电磁兼容性。该研究对提高我国汽车电子产品的可靠性、安全性以及电磁兼容水平具有理论及实践意义。

关键词: 汽车电子, 全寿命, 电磁兼容, 测试模型

Abstract:

So far much of the EMC testing of automobile electronic products was centered on the new product development stage. An EMC test method of whole life-cycle of automobile electronic products was proposed in this work. The accelerated life testing was carried out by establishing testing model, degradation model and verification model. Results reveal that in the product life span, EMC performance becomes worse with the prolonged time of use, and will exceed the EMC standards limits at some stage, which could have an adverse impact on the electromagnetic compatibility of the vehicle. This work has theoretical and practical significance to improve the reliability, security, and electromagnetic compatibility of automobile electronic products in China.

Key words: automobile electronic, testing model, electromagnetic compatibility, whole life-cycle

中图分类号: 

  • U463.6

开放获取 本文遵循知识共享-署名-非商业性4.0国际许可协议(CC BY-NC 4.0),允许第三方对本刊发表的论文自由共享(即在任何媒介以任何形式复制、发行原文)、演绎(即修改、转换或以原文为基础进行创作),必须给出适当的署名,提供指向本文许可协议的链接,同时表明是否对原文作了修改,不得将本文用于商业目的。CC BY-NC 4.0许可协议详情请访问 https://creativecommons.org/licenses/by-nc/4.0