J4 ›› 2011, Vol. 24 ›› Issue (4): 52-57.

• 目录 • 上一篇    下一篇

三维时间基线视差法在物流货架震动变形监测中的应用

 丁新华1, 刘苏2, 王怀林2   

  1. 1.山东省遥感技术应用中心,山东 济南 250013; 2.山东建筑大学,山东 济南 250100
  • 出版日期:2011-08-20 发布日期:2011-08-20
  • 通信作者: 丁新华(1961-),男,高级工程师,研究方向为测量与遥感, E-mail:dxh1961@163.com

Application of threedimensional motion parallax in the deformation monitoring of logistic shelves

 DING Xin-Hua1, LIU Su2, WANG Huai-Lin2   

  1. 1.Shandong Remote Sensing Technology Application Center, Jinan 250013, China; 2.Shandong Jianzhu University, Jinan 250100, China
  • Online:2011-08-20 Published:2011-08-20

摘要:

         将三维时间基线视差法引入结构变形监测实验,利用时间基线视差法处理钢结构货架变形测量数据,实验结果显示货架结构稳定。该方法考虑了分辨率、焦距以及外界环境条件的影响,并采用有效的方法进行消除,使普通数码相机能够用于摄影测量。

关键词: 时间基线视差法, 钢结构货架, 变形测量

Abstract:

       We introduced threedimensional motion parallax into structural deformation monitoring experiment, in which we employed motion parallax to process steel shelves deformation data. Experimental results show that the images of shelves are stable. This method takes such negative influences as resolution, focus and external experimental conditions into account and effectively eliminates them. A common digital camera therefore can be employed in photogrammetry.

Key words: motion parallax, steel shelves, deformation measurement

中图分类号: 

  • TU317

开放获取 本文遵循知识共享-署名-非商业性4.0国际许可协议(CC BY-NC 4.0),允许第三方对本刊发表的论文自由共享(即在任何媒介以任何形式复制、发行原文)、演绎(即修改、转换或以原文为基础进行创作),必须给出适当的署名,提供指向本文许可协议的链接,同时表明是否对原文作了修改,不得将本文用于商业目的。CC BY-NC 4.0许可协议详情请访问 https://creativecommons.org/licenses/by-nc/4.0