山东科学 ›› 2025, Vol. 38 ›› Issue (4): 39-45.doi: 10.3976/j.issn.1002-4026.20240097

• 药理与毒理 • 上一篇    下一篇

领鞭毛虫Salpingoeca rosetta的纤毛组装研究

吴倩龙(), 胡昆, 胡哲文, 张颖, 田爱洁, 冯雳()   

  1. 江汉大学 生命科学学院,湖北 武汉 430056
  • 收稿日期:2024-08-02 出版日期:2025-08-20 发布日期:2025-08-05
  • 通信作者: 冯雳 E-mail:1269285437@qq.com;fengli0702@jhun.edu.cn
  • 作者简介:吴倩龙(1997—),硕士研究生,研究方向为莱茵衣藻和领鞭毛虫的纤毛调控。E-mail:1269285437@qq.com
  • 基金资助:
    国家重点研发计划(2020YFA0907400);国家自然科学基金项目(32170702)

Research on the cilia assembly in Salpingoeca rosetta

WU Qianlong(), HU Kun, HU Zhewen, ZHANG Ying, TIAN Aijie, FENG Li()   

  1. School of Life Sciences, Jianghan University, Wuhan 430056, China
  • Received:2024-08-02 Online:2025-08-20 Published:2025-08-05
  • Contact: FENG Li E-mail:1269285437@qq.com;fengli0702@jhun.edu.cn

摘要:

为了探究领鞭毛虫的纤毛组装机制,以群体形成性领鞭毛虫(Salpingoeca rosetta)为研究对象,首次利用机械力切割使领鞭毛虫纤毛脱落,用氯化锂(LiCl)诱导纤毛的延伸实验,对领鞭毛虫的纤毛脱落再生、纤毛组装和延伸的机理进行了研究。在LiCl诱导纤毛延伸实验中,确定了250 mmol/L的终浓度为实验浓度;在纤毛脱落再生实验中,确定了机械力切割的工作条件。 结果显示,施加机械力处理后,领鞭毛虫纤毛经120 min恢复至原长;LiCl处理180 min后,领鞭毛虫纤毛延长了60%以上。机械力切割与冷胁迫诱导领鞭毛虫纤毛脱落的方式相比,机械力切割的方式更迅速便捷高效,并且操作简单,实验可重复性好。该研究可作为探究领鞭毛虫纤毛组装分子机制的基础。

关键词: 领鞭毛虫, 氯化锂诱导纤毛延伸, 纤毛再生, 纤毛组装, 机械力切割

Abstract:

To investigate the mechanism of the cilia assembly in choanoflagellates, this study focused on a colony-forming choanoflagellate, Salpingoeca rosetta. For the first time, the cilia of Salpingoeca rosetta were disassembled viamechanical shearing, and a LiCl (lithium chloride)-induced ciliaelongation experiment was conducted to investigate mechanisms underlying the disassembly, regeneration, and assembly of the cilia of Salpingoeca rosetta. In the LiCl-induced ciliaelongation experiment, a final molarity of 250 mmol/L was used. In the cilia disassembly and regeneration experiments, the mechanical shearing conditions were determined. Experimental results show that the cilia of Salpingoeca rosetta were restored to their original lengths after a mechanical force was applied on them for 120 min; moreover, LiCl-induced a ciliaelongation by more than 60% after 180 min of LiCl treatment.Compared with the cold-stress-induced disassembly of the cilia of Salpingoeca rosetta, the mechanical shearing method was faster, more efficient, and simpler with higher repeatability. This study provides a fundamental method for investigating the molecular mechanism of the cilia assembly in Salpingoeca rosetta.

Key words: Salpingoeca rosetta, LiCl-induced cilia elongation, cilia regeneration, cilia assembly, mechanical shearing

中图分类号: 

  • Q28

开放获取 本文遵循知识共享-署名-非商业性4.0国际许可协议(CC BY-NC 4.0),允许第三方对本刊发表的论文自由共享(即在任何媒介以任何形式复制、发行原文)、演绎(即修改、转换或以原文为基础进行创作),必须给出适当的署名,提供指向本文许可协议的链接,同时表明是否对原文作了修改,不得将本文用于商业目的。CC BY-NC 4.0许可协议详情请访问 https://creativecommons.org/licenses/by-nc/4.0