山东科学 ›› 2019, Vol. 32 ›› Issue (2): 1-6.doi: 10.3976/j.issn.1002-4026.2019.02.001

• 海洋科技与装备 •    下一篇

基于以太网技术的船舶气象仪通信功能的设计与实现

初伟先,张赟,漆随平,王东明   

  1. 齐鲁工业大学(山东省科学院),山东省科学院海洋仪器仪表研究所,山东省海洋监测仪器装备技术重点实验室,国家海洋监测设备工程技术研究中心,山东 青岛 266001
  • 收稿日期:2018-08-09 出版日期:2019-04-20 发布日期:2019-04-02
  • 作者简介:初伟先(1981— ),男,高级工程师,工程硕士,研究方向为海洋仪器。E-mail:chuweixian@163.com
  • 基金资助:
    山东省重点研发计划(军民科技融合)(2016JMRH0538)

Design and implementation of communication function of ship meteorological instrument based on Ethernet technology

CHU Wei-xian, ZHANG Yun, QI Sui-ping, WANG Dong-ming   

  1. Shandong Provincial Key Laboratory of Marine Monitoring Instrument Equipment Technology, National Engineeringand Technological Research Center of Marine Monitoring Equipment, Institute of Oceanographic Instrumentation,Qilu University of Technology (Shandong Academy of Sciences), Qingdao 266001, China
  • Received:2018-08-09 Online:2019-04-20 Published:2019-04-02

摘要: 提出了基于以太网技术的船舶气象仪通信功能的设计方案。将S3C2440A与DM9000AE两种芯片结合使用,设计了船舶气象仪通信板。测试结果表明,该设计实现了船舶气象仪和其他船载设备之间的以太网通信,完全满足船舶气象仪对以太网通信的要求。

关键词: 船舶气象仪, 以太网技术, S3C2440A

Abstract: This paper presented a design scheme of communication function of ship meteorological instrument based on Ethernet technology. Combining S3C2440A and DM9000AE chips, the communication board of ship meteorological instrument was designed. The test results show that the design realizes the Ethernet communication between the ship meteorological instrument and other shipborne equipment, fully meeting the requirements of the ship meteorological instrument for Ethernet communication.

Key words: ship meteorological instrument, Ethernet technology, S3C2440A

中图分类号: 

  • P716+.3

开放获取 本文遵循知识共享-署名-非商业性4.0国际许可协议(CC BY-NC 4.0),允许第三方对本刊发表的论文自由共享(即在任何媒介以任何形式复制、发行原文)、演绎(即修改、转换或以原文为基础进行创作),必须给出适当的署名,提供指向本文许可协议的链接,同时表明是否对原文作了修改,不得将本文用于商业目的。CC BY-NC 4.0许可协议详情请访问 https://creativecommons.org/licenses/by-nc/4.0