J4 ›› 2014, Vol. 27 ›› Issue (3): 57-60.doi: 10.3976/j.issn.1002-4026.2014.03.011

• 论文 • 上一篇    下一篇

氯化氢催化氧化反应器材质研究

李晓明,梁睿渊,齐国栋,王萍,边祥成,陈其宝,韩胜兵,赵贵荣   

  1. 甘肃银光聚银化工有限公司,甘肃 白银 730900
  • 收稿日期:2013-10-15 出版日期:2014-06-20 发布日期:2014-06-20
  • 作者简介:李晓明(1966-),男,研究员级高工,博士,研究方向为TDI工艺研究与项目管理。

Material investigation of hydrogen chloride catalytic oxidation reactor

 LI Xiao-Ming, LIANG Rui-Yuan, QI Guo-Dong, WANG Ping, BIAN Xiang-Cheng, CHEN Qi-Bao, HAN Sheng-Bing, ZHAO Gui-Rong   

  1. Gansu Yinguangjuyin Chemical Co. Ltd., Baiyin 730900, China
  • Received:2013-10-15 Online:2014-06-20 Published:2014-06-20

摘要:

        选取哈氏C-2000、哈氏C-4、Inconel 600、Incoloy 825、316 L、 Ni-6及纯Ta等7种有代表性的金属材料,开展了耐腐蚀性评价实验。根据实验前后挂片失重率与厚度变化情况及挂片在催化氧化反应体系中的腐蚀速率,确定了不同金属材料在氯化氢催化氧化反应体系中的耐腐蚀性。实验表明,Ta耐腐蚀性能最好,耐腐蚀率为 0.309 3 g/(dm2·月)、0.053 0  mm/年;其次为Inconel 600,耐腐蚀率为0.566 8 g/(dm2·月)、0.230 2 mm/年。

关键词: 金属材料, 氯化氢, 腐蚀速率, 耐腐蚀性

Abstract:

        We measure the corrosion rate of such representative metal materials as Hastelloy C-2000, Hastelloy C-4, Inconel 600, Incoloy 825, 316 L, Ni-6 and pure Ta. We determine corrosion resistance rates of different metal materials in hydrogen chloride catalytic oxidation reactor based on weight loss rate and thickness variety rate of hanging sheets between pre and postexperiments and their corrosion rates. Experiments indicate that pure Ta has the best corrosion resistance rate of 0.309 3 g / (dm2·Month) and 0.053 0 mm / a.Inconel 600 has the second best corrosion resistance rate of 0.566 8 g / (dm2·Month) and 0.230 2 mm / a.

中图分类号: 

  • TQ052

开放获取 本文遵循知识共享-署名-非商业性4.0国际许可协议(CC BY-NC 4.0),允许第三方对本刊发表的论文自由共享(即在任何媒介以任何形式复制、发行原文)、演绎(即修改、转换或以原文为基础进行创作),必须给出适当的署名,提供指向本文许可协议的链接,同时表明是否对原文作了修改,不得将本文用于商业目的。CC BY-NC 4.0许可协议详情请访问 https://creativecommons.org/licenses/by-nc/4.0