基于Micro-PIV的不同截面形状微柱群内部流场特性研究

doi:10.3976/j.issn.1002-4026.2019.05.010

山东科学 ›› 2019, Vol. 32 ›› Issue (5): 81-87.doi: 10.3976/j.issn.1002-4026.2019.05.010

基于Micro-PIV的不同截面形状微柱群内部流场特性研究

刘志刚，吕明明，孔令健，贾磊，江亚柯

齐鲁工业大学（山东省科学院），山东省科学院能源研究所，山东济南 250014

收稿日期:2019-06-30 出版日期:2019-10-20 发布日期:2019-10-09
作者简介:刘志刚（1973—），男，研究员，研究方向为强化传热。E-mail：zgliu9322@163.com
基金资助:
山东省自然科学基金(ZR2016YL005)；山东省科学院青年基金(2018QN0017)；山东省重点研发计划（2017GGX40125，2018GGX104006）

Study on flow field in micro-cylinder groups with different cross-section shapes by Micro-PIV method

LIU Zhi-gang, LÜ Ming-ming, KONG Ling-jian, JIA Lei, JIANG Ya-ke

Energy Research Institute,Qilu University of Technology (Shandong Academy of Sciences),Jinan 250014,China

Received:2019-06-30 Online:2019-10-20 Published:2019-10-09

摘要/Abstract

摘要： 采用显微粒子测速技术（Micro-PIV）对圆形、椭圆形及菱形等不同截面形状错排微柱群绕流流动进行研究，得到了不同雷诺数（Re）下微柱群内部的速度场、流线等绕流流场信息，分析了Re与截面形状对绕流流场结构的影响规律。研究结果表明，微柱体绕流过程中漩涡脱落相对于常规尺度具有一定的滞后性；圆形微柱体背风区最早发生流动分离，菱形、椭圆形次之；随着Re的增大，微柱体尾流区出现涡结构，回流长度逐渐增大，在三种截面形状微柱群绕流流动中圆形截面微柱群的回流长度和回流区域最大。

关键词: Micro-PIV, 微柱群, 流场特性, 流线, 涡结构

Abstract: The flow around staggered micro-cylinders with different cross-sectional shapes, such as circular, elliptical, and diamond, was investigated via micro particle image velocimetry (Micro-PIV). Flow field information, such as velocity field and streamline, was obtained using different Reynolds numbers（Re）, and the impacts of Re and cross-sectional shape on the flow field structure were analyzed. Results show that boundary layer separation in the process of flow around the micro-cylinder lagged in comparison to macro-scale flow around the cylinder. Flow separation in the wake region of the micro-cylinder having a circular cross-section occurred earlier than those of micro-cylinders having elliptical and diamond-shaped cross-sections. A vortex structure appeared in the wake region of the micro-cylinders, and backflow length increased with the increasing Re. The backflow length and backflow area of the flow around the micro-cylinder having a circular cross-section are the largest among the three types of cross-sections.

Key words: Micro-PIV, micro-cylindergroups, flow field property, streamline, vortex

中图分类号:

TK124

刘志刚, 吕明明, 孔令健, 贾磊, 江亚柯. 基于Micro-PIV的不同截面形状微柱群内部流场特性研究[J]. 山东科学, 2019, 32(5): 81-87.

LIU Zhi-gang, LÜ Ming-ming, KONG Ling-jian, JIA Lei, JIANG Ya-ke . Study on flow field in micro-cylinder groups with different cross-section shapes by Micro-PIV method[J]. Shandong Science, 2019, 32(5): 81-87.

参考文献 13

1	KANDLIKAR S G, GRANDE W J. Evaluation of single-phase flow in micro channels for high heat flux chip cooling-Thermohydraulic performance enhancement and fabrication technology [J]. Heat Transfer Engineering, 2004, 25(8): 5-16. doi: 10.1080/01457630490519772
2	刘志刚，张承武，管宁，等．尺度效应对低Reynolds数下微/小柱群通道内对流换热的影响[J].化工学报，2011，62（7）：1852-1859. doi: 10.3969/j.issn.0438-1157.2011.07.010
3	KOSAR A, MISHRA C, PELES Y. Laminar flow across a bank of low aspect ratio micro pin fins[J]. Journal of Fluids Engineering, 2005, 127(3):419-430. doi: 10.1115/1.1900139
4	YANG K S, CHU W H, CHEN I Y, Wang C C. A comparative study of the airside performance of heat sinks having pin fin configurations[J]. International Journal of Heat and Mass Transfer, 2007, 50(23/24):4661-4667. doi: 10.1016/j.ijheatmasstransfer.2007.03.006
5	SAHITI N, DURST F, GEREMIA P. Selection and optimization of pin cross-sections for electronics cooling[J]. Applied Thermal Engineering, 2007, 27(1):111-119. doi: 10.1016/j.applthermaleng.2006.05.018
6	孙姣，张宾，唐湛棋，等．旋转圆柱绕流的PIV实验研究[J]. 实验流体力学，2016，30（1）：81-90. doi: 10.11729/syltlx20150037
7	GOHARZADEH A, MOLKI A. Measurement of fluid velocity development behind a circular cylinder using particle image velocimetry (PIV) [J]. European Journal of Physics, 2015, 36(1):015001. doi: 10.1088/0143-0807/36/1/015001
8	LEE S J, DAICHIN. Flow past a circular cylinder over a free surface: Interaction between the near wake and the free surface deformation[J]. Journal of Fluid and Structures, 2004, 19(8):1049-1059. doi: 10.1016/j.jfluidstructs.2004.06.006
9	YAGMUR S, DOGAN S, AKSOY M H, et al. Comparison of flow characteristics around an equilateral triangular cylinder via PIV and large eddy simulation methods[J]. Flow Measurement and Instrumentation, 2017, 55:23-36. doi: 10.1016/j.flowmeasinst.2017.04.001
10	涂程旭，王昊利，林建忠．圆柱绕流的流场特性及涡脱落规律研究[J]. 中国计量学院学报，2008，19（2）：98-102． doi: 10.3969/j.issn.1004-1540.2008.02.002
11	李永，吕明明，刘志刚，等．流体绕流微柱群的Micro-PIV实验研究[J].山东科学，2018，31（6）：50-54. doi: 10.3976/j.issn.1002-4026.2018.06.008
12	张承武，浦龙梅，姜桂林，等．不同截面形状微肋片内流动阻力特性[J]．化工学报，2014，65（6）：2042-2048. doi: 10.3969/j.issn.0438-1157.2014.06.013
13	祝叶，管宁，李栋，等．不同截面形状超疏水微肋阵内对流换热特性[J]. 化工学报，2017，68（1）：63-71. doi: 10.11949/j.issn.0438-1157.20161079

[1]	刘进, 谭华, 苏亮, 仇国际, 刘睿, 罗崇鑫, 王宇, 刘豪. 小型便携式水下机器人侧扫声呐的流线型优化分析[J]. 山东科学, 2023, 36(6): 8-14.
[2]	李济超, 季璨, 刘志刚, 李慧君, 马超, 匙文涛. 单圆柱微通道内流动特性实验研究[J]. 山东科学, 2020, 33(4): 53-62.
[3]	刘进, 蒋慧略, 刘波, 杜大伟. 汽车外流场分析以及流线型改进[J]. 山东科学, 2020, 33(3): 87-92.
[4]	李永，吕明明，刘志刚，祝叶. 流体绕流微柱群的Micro-PIV实验研究[J]. 山东科学, 2018, 31(6): 50-54.

基于Micro-PIV的不同截面形状微柱群内部流场特性研究

Study on flow field in micro-cylinder groups with different cross-section shapes by Micro-PIV method

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献 13

相关文章 4

Metrics

本文评价

推荐阅读 0