余热发电系统双S型旋流片喷嘴内部闪蒸过程数值研究

doi:10.3976/j.issn.1002-4026.2021.06.010

山东科学 ›› 2021, Vol. 34 ›› Issue (6): 77-82.doi: 10.3976/j.issn.1002-4026.2021.06.010

余热发电系统双S型旋流片喷嘴内部闪蒸过程数值研究

季璨(),刘志刚(),吕明明

齐鲁工业大学(山东省科学院) 山东省科学院能源研究所,山东济南 250014

收稿日期:2021-07-09 出版日期:2021-12-20 发布日期:2021-12-13
通信作者: 刘志刚 E-mail:zgliu9322@163.com
作者简介:季璨(1989—),女,博士,助理研究员,研究方向为流动与强化传热。E-mail: jic@sderi.cn
基金资助:
国家自然科学基金(52076113);山东省科学院青年基金(2019QN0021);山东省科学院青年基金(2019QN0019);山东省科学院科技发展基金(科基合字2019第2号);山东省科学院科技发展基金(2020KJC-GH04);山东省重点研发计划(2019GSF109074)

Numerical investigation of the flash evaporation process inside a nozzle with two S-shaped internal vanes in a waste heat power generation system

JI Can(),LIU Zhi-gang(),LÜ Ming-ming

Energy Research Institute,Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China

Received:2021-07-09 Online:2021-12-20 Published:2021-12-13
Contact: LIU Zhi-gang E-mail:zgliu9322@163.com

摘要/Abstract

摘要：

闪蒸是液体经历压力突降时的快速汽化现象,在高耗能行业余热回收领域具有广阔的应用前景。针对闪蒸余热发电系统喷嘴内部流动与相变现象研究相对缺乏的问题,以典型的双S型旋流片喷嘴为研究对象,展开内部闪蒸问题的数值研究。基于耦合的流体体积函数模型与降压相变模型构建喷嘴内部闪蒸流动的数学描述,并利用CFD软件进行数值求解。结果表明,流体流经S型旋流片时开始旋转加速,在旋流片下游呈现中间旋转程度低、周围旋转程度高,随后经流道收缩段加速喷出。旋流片下游压力降低引发内部闪蒸现象,流体最终以气液混合物状态离开喷嘴。此外,从改善雾化效果、减轻积垢、增加通流能力的角度提出一种改进的喷嘴结构,能够促进喷雾闪蒸充分快速进行,有助于进一步提升闪蒸余热发电系统效率。

关键词: 闪蒸, 数值模拟, 两相流, 相变

Abstract:

Flash evaporation refers to the abrupt vaporization of liquid when it undergoes a sudden pressure drop. It has broad application prospects in the field of waste heat recovery in energy-intensive industries. Motivated by the lack of research on internal flow and phase-change phenomena inside the nozzle in a waste heat power generation system, in this work, we conduct numerical research on the internal flashing in a typical nozzle with two S-shaped internal vanes. The mathematical description of this problem is given by coupling the Volume of Fluent model and the pressure-driven phase-change model, and a numerical solution is obtained using CFD software. Results show that the fluid starts to rotate and accelerate when it flows through the S-shaped vanes. Downstream the vanes, the rotation speed is low in the middle and high near the wall. After that, the fluid accelerates and ejects through the contraction section of the nozzle. Pressure drop downstream the vanes leads to flash evaporation inside the nozzle, and fluid leaves the nozzle as a liquid-vapor mixture. In addition, a modified nozzle structure is proposed from the perspectives of improving atomization, reducing fouling, and enlarging passage area. The proposed structure can promote the complete and rapid progress of spray flash evaporation and help to further improve the efficiency of the waste heat power generation system.

Key words: flash evaporation, numerical simulation, two-phase flow, phase change

中图分类号:

TK124

季璨, 刘志刚, 吕明明. 余热发电系统双S型旋流片喷嘴内部闪蒸过程数值研究[J]. 山东科学, 2021, 34(6): 77-82.

JI Can, LIU Zhi-gang, LÜ Ming-ming. Numerical investigation of the flash evaporation process inside a nozzle with two S-shaped internal vanes in a waste heat power generation system[J]. Shandong Science, 2021, 34(6): 77-82.

图/表 10

图1

图2

图3

图4

表1

图5

图6

图7

图8

图9

参考文献 15

[1]	IGLESIAS GARCIA S, FERREIRO GARCIA R, CARBIA CARRIL J, et al. A review of thermodynamic cycles used in low temperature recovery systems over the last twoyears[J]. Renewable and Sustainable Energy Reviews, 2018, 81:760-767. DOI: 10.1016/j.rser.2017.08.049. doi: 10.1016/j.rser.2017.08.049
[2]	VARMA G V P, SRINIVAS T. Parametric analysis of steam flashing in a power plant using waste heat of cementfactory[J]. Energy Procedia, 2016, 90:99-106. DOI: 10.1016/j.egypro.2016.11.174. doi: 10.1016/j.egypro.2016.11.174
[3]	WANG Q, WU W F, LI D T, et al. Thermodynamic analysis and optimization of four organic flash cycle systems for waste heat recovery[J]. Energy Conversion and Management, 2020, 221:113171. DOI: 10.1016/j.enconman.2020.113171. doi: 10.1016/j.enconman.2020.113171
[4]	OZA R D, SINNAMON J F. An experimental and analytical study of flash-boiling fuel injection[C]// SAE Technical Paper Series. 400 Commonwealth Drive,Warrendale, PA, United States: SAE International, 1983: 2948. DOI: 10.4271/830590. doi: 10.4271/830590
[5]	SERRAS-PEREIRA J, Van ROMUNDE Z, ALEIFERIS P G, et al. Cavitation, primary break-up and flash boiling of gasoline, Iso-octane and n-pentane with a real-size optical direct-injection nozzle[J]. Fuel, 2010, 89(9):2592-2607. DOI: 10.1016/j.fuel.2010.03.030. doi: 10.1016/j.fuel.2010.03.030
[6]	GÜNTHER A, WIRTH K E. Evaporation phenomena in superheated atomization and its impact on the generatedspray[J]. International Journal of Heat and Mass Transfer, 2013, 64:952-965. DOI: 10.1016/j.ijheatmasstransfer.2013.05.034. doi: 10.1016/j.ijheatmasstransfer.2013.05.034
[7]	LI S Y, ZHANG Y Y, XU B. Correlation analysis of superheated liquid jet breakup to bubble formation in a transparent slitnozzle[J]. Experimental Thermal and Fluid Science, 2015, 68:452-458. DOI: 10.1016/j.expthermflusci.2015.04.023. doi: 10.1016/j.expthermflusci.2015.04.023
[8]	ZHANG Y Y, LI S Y, ZHENG B, et al. Quantitative observation on breakup of superheated liquid jet using transparent slitnozzle[J]. Experimental Thermal and Fluid Science, 2015, 63:84-90. DOI: 10.1016/j.expthermflusci.2015.01.004. doi: 10.1016/j.expthermflusci.2015.01.004
[9]	WU S Q, PAN H J, XU M, et al. Investigation of rapid atomization and collapse of superheated liquid fuel spray under superheatedconditions[J]. Atomization and Sprays, 2016, 26(12):1361-1384. DOI: 10.1615/atomizspr.2016014231. doi: 10.1615/atomizspr.2016014231
[10]	WU S Q, XU M, HUNG D L S, et al. Effects of nozzle configuration on internal flow and primary jet breakup of flash boiling fuel sprays[J]. International Journal of Heat and Mass Transfer, 2017, 110:730-738. DOI: 10.1016/j.ijheatmasstransfer.2017.03.073. doi: 10.1016/j.ijheatmasstransfer.2017.03.073
[11]	WU S Q, XU M, HUNG D L S, et al. In-nozzle flow investigation of flash boiling fuel sprays[J]. Applied Thermal Engineering, 2017, 117:644-651. DOI: 10.1016/j.applthermaleng.2016.12.105. doi: 10.1016/j.applthermaleng.2016.12.105
[12]	MAKSIC S, MEWES D. CFD-calculation of the flashing flow in pipes and nozzles[C]// Proceedings of ASME 2002 Joint US-European Fluids Engineering Division Conference, Montreal, Quebec, Canada:Fluids Engineerirg Division. 2009: 511-516. DOI: 10.1115/FEDSM2002-31033. doi: 10.1115/FEDSM2002-31033
[13]	JANET J P, LIAO Y X, LUCAS D. Heterogeneous nucleation in CFD simulation of flashing flows in converging-divergingnozzles[J]. International Journal of Multiphase Flow, 2015, 74:106-117. DOI: 10.1016/j.ijmultiphaseflow.2015.04.005. doi: 10.1016/j.ijmultiphaseflow.2015.04.005
[14]	PALAU-SALVADOR G, GONZALEZ ALTOZANO P, ARVIZA-VALVERDE J. Numerical modeling ofcavitating flows for simple geometries using FLUENT V6.1[J]. Spanish Journal of Agricultural Research, 2007, 5(4):460. DOI: 10.5424/sjar/2007054-269. doi: 10.5424/sjar/2007054-269
[15]	INGLE R, RAO V S, MOHAN L S, et al. Modelling of flashing in capillary tubes using homogeneous equilibrium approach[J]. Procedia IUTAM, 2015, 15:286-292. DOI: 10.1016/j.piutam.2015.04.040. doi: 10.1016/j.piutam.2015.04.040

网格编号	网格节点数	网格单元数
M1	671 457	1 057 950
M2	705 993	1 093 020
M3	758 077	1 145 905
M4	783 853	1 172 155

余热发电系统双S型旋流片喷嘴内部闪蒸过程数值研究

Numerical investigation of the flash evaporation process inside a nozzle with two S-shaped internal vanes in a waste heat power generation system

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

图/表 10

参考文献 15

相关文章 15

Metrics

本文评价

推荐阅读 0

[1]	董辉,任旭云. 基于DEM-CFD耦合方法的水合物与砂颗粒运动分析[J]. 山东科学, 2022, 35(3): 123-130.
[2]	王小雨,张聿祥. 内插中心斜杆换热管的换热性能[J]. 山东科学, 2022, 35(3): 35-42.
[3]	高国强, 陈国富. 多元流体油藏传热计算新模型[J]. 山东科学, 2021, 34(5): 49-57.
[4]	纪君娜. 栅栏板护面下护岸越浪数值模拟[J]. 山东科学, 2021, 34(4): 14-20.
[5]	黄庭祥, 胡成功, 姜小辉, 孙晓, 曹亮, 赵红霞. 双层皮带机防雨罩流场和粉尘浓度场分析[J]. 山东科学, 2021, 34(4): 80-86.
[6]	霍慕杰, 别海燕, 林子昕, 安维中. 转子流道倾斜式的外驱旋转压能交换器性能研究[J]. 山东科学, 2020, 33(6): 16-21.
[7]	刘进, 蒋慧略, 刘波, 杜大伟. 汽车外流场分析以及流线型改进[J]. 山东科学, 2020, 33(3): 87-92.
[8]	温永祺, 谢东繁, 王祥, 周豪. 基于车间通信的换道策略研究[J]. 山东科学, 2019, 32(4): 46-55.
[9]	孙德智，王桂青, 田长文. 基于MAGMASOFT的大型铝合金叶轮铸造工艺模拟[J]. 山东科学, 2018, 31(4): 44-49.
[10]	孔令健，刘志刚，季璨，江亚柯. 微肋阵通道沸腾起始点实验研究[J]. 山东科学, 2018, 31(4): 65-71.
[11]	唐晟，赵耀华，刁彦华，全贞花. 多孔挤压铝扁管电子芯片热沉的热性能研究[J]. 山东科学, 2018, 31(3): 39-47.
[12]	贾磊，季璨，江亚柯，刘志刚. 太阳花散热器的热性能分析[J]. 山东科学, 2018, 31(3): 48-54.
[13]	刘野，丁圆强，赵环宇，柴辉，赵强，徐宇柘，姜峰. 大型海洋资料浮标波浪能供电装置数值模拟研究[J]. 山东科学, 2017, 30(6): 6-14.
[14]	何燕，吴龚鹏，陈伟. 流化床反应器内活性焦流动特性的模拟研究[J]. 山东科学, 2017, 30(6): 58-64.
[15]	郭保仓，杜保周，刘志刚，孔令健，吕明明，李慧君. 微柱群通道流动沸腾两相摩擦压降特性研究[J]. 山东科学, 2017, 30(6): 50-57.